contact us

Use the form on the right to contact us.

You can edit the text in this area, and change where the contact form on the right submits to, by entering edit mode using the modes on the bottom right.

30 North Gould Street
Sheridan, WY, 82801
United States

1 (628) 600-5288

Ultimate Sport Tuning LLC

Store Front (Maxxecu)

MaxxECU Street

maxxecu_street_1814_02.jpg
maxxecu_street_1814_01.jpg
maxxecu_street_1814_03.jpg
maxxecu_street_1814_02.jpg
maxxecu_street_1814_01.jpg
maxxecu_street_1814_03.jpg

MaxxECU Street

from $890.00

Advanced entry-level engine control system for up to 6 sequential cylinders. Up to 12 in wasted spark.

  • Faster and easier tuning with built-in wideband lambda and a built-in MAP-sensor up to 3 bar / 43.5 psi of boost.

  • Get started faster with the easy-to-use MTune PC-software.

WHAT’S IN THE BOX

  • MaxxECU STREET / Unit only with no accessories.

  • MaxxECU STREET STANDARD  / ECU, harness, and accessories.

  • MaxxECU STREET PREMIUM / ECU, harness, accessories, and LSU 4.2

MaxxECU Street Features

Target engines for MaxxECU Street

  • All 3-12 cylinder engines (4-stroke)

  • Up to 6 cylinders fully sequentially

  • Up to 12 cylinders in wasted spark

Inputs

  • Intake air temperature sensor (IAT)

  • Coolant temperature sensor (CLT)

  • Throttle position sensor (TPS)

  • Lambda (WBO) sensor. Uses a sensor directly connected to the ECU without any additional electronics. Supports Bosch LSU 4.2, 4.9

  • 2 trigger inputs. VR or digital. Automatic trigger level detection. The signals are processed by a completely separated processor for maximum performance and immunity against interference

  • 2 extra temperature sensors. Can be used as switches or to control additional functions

  • 2 extra 0-5V inputs. Can be used for additional sensors such as for measurement of fuel/oil pressure

  • 2 digital inputs used for example for speed sensors (Hall) or switches

  • Built-in 400kPa MAP-sensor for up to 3bar/43PSI of boost

Outputs

  • 6 injectors outputs. High impedance only

  • 6 ignition outputs. 5V signal to drive ignition modules, CDI units or coils

  • 4 outputs for extra features. Can be used to control virtually anything. Fuel pumps, idle control, boost solenoids, nitrous, shift lights, fans, warning lights, etc. GPO 1-3 (2A), GPO 8 (5A)

Technical

  • CAN bus (additional wires required)

  • USB communication for tuning with MTune

  • 8MB memory for internal logging, up to 1000Hz

  • Supply voltage 8-22V

  • ARM Cortex-M3 120MHz main processor

  • Resolution on ignition: 0.1 degrees

  • Resolution on injectors: 0.001 ms

  • Updates the fuel and ignition calculations 2000 times per second

  • The fastest PC communication on the market

  • Weight: 520g

  • 140x134x42mm (including mounting points, excluding connector)

  • Aluminum casing

 

PREMIUM (ECU, harness, accessories, LSU):
STANDARD (ECU, harness and accessories):
Quantity:
Add To Cart

Selected features

  • E-Throttle

  • Built-in wideband lambda

  • Traction control

  • Anti-lag

  • Shift-cut and launch

  • Variable valve control

  • Flex fuel

  • CAN bus

  • Internal loggings

  • 6 injector output (high/low impedance)

  • 6 ignition outputs

  • 7 extra (GND) outputs

  • 2 extra outputs for E-Throttle

  • 6 extra analog inputs

  • Bluetooth