​Features:

​

• Superseal 1.0 connectors.

• 550 kPa MAP sensor (4.5 bar / 65 PSI boost), user-serviceable, with BSP 1/8 thread.

• 3-axis accelerometer (up to 8 G).

• ARM dual core CPU.

• 6-22V operating voltage.

• 16GB internal log capacity, 1000Hz, all 1600+ channels.

• USB-C 480mbit/s (MTune PC communication). 2.0

• USB-C 12mbit/s (tablet charging).*

• WIFI communication with MTune and MDash.*

• Bluetooth connectivity with MDash.

• Dual CAN bus for expansion modules, OEM vehicle CAN, OBDII, CAN gearbox control.

• Resolution on ignition: 0.1 degrees.

• Resolution on injectors: 0.001 ms.

• Performs fuel and ignition calculations 3,000 times per second.

• 200Hz sampling rate on all EGT inputs.

• 2000Hz sampling rate on analog/digital inputs.

• Weight: 700g.

• 240x138x35mm including protruding connectors.

• Black powder-coated aluminium case.

• All inputs and outputs are safeguarded against overvoltage, reverse polarity, and short circuits.

​

MaxxECU RACE GEN2 Inputs:

​​

• 8 pulse inputs (VR/HALL): 2 with selectable 5/12V power supply, all with selectable pullups.

• 24 Analog inputs (selectable pullups).

• 8 Exhaust Gas Temperature inputs (TYPE-K).

• Dual wideband lambda (LSU 5.2/4.9/4.2).

• Dual knock sensor input.

• ​

MaxxECU RACE GEN2 Outputs:

​​

• 16 injectors (Peak-hold high/low impedance) / GP outputs.

• 12 IGN / GP outputs (selectable +5V/12V/GND).

• 8 GP Outputs (GND).

• 4 GP Outputs (+12V).

• 4 GP Outputs (H-bridge/E-Throttle)

​

A direct comparison against the RACE GEN1 can be seen below: